Vous êtes ici

Supermicro X10DRT-P

Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s

Intel® C612 Express chipset

Up to 1TB ECC DDR4, up to 2133MHz; 16x DIMM sockets

Expansion slots:
1 PCI-E 3.0 x16 and 1 PCI-E 3.0 x8 slot,
1 PCI-E 3.0 x16 + 1 PCI-E 3.0 x8 (for Supermicro storage add-on card)

Intel® i350-AM2 Dual port GbE LAN

10x SATA3 (6Gbps) ports

Integrated IPMI 2.0 and KVM with Dedicated LAN

2x USB 3.0 ports (2 rear)

Physical Stats  
Form Factor Proprietary Twin
Dimensions 6.8" x 18.86" (17.2cm x 47.9cm)
Processor/Cache  
CPU Intel® Xeon® processor E5-2600 v3 family
  Dual Socket R3 (LGA 2011)
Cores / Cache Up to 18 Cores / Up to 45MB Cache
System Bus QPI up to 9.6 GT/s
System Memory  
Memory Capacity 16x 288-pin DDR4 DIMM sockets
  Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
  LRDIMM: 64GB, 32GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
  Detects double-bit errors (using ECC memory)
On-Board Devices  
Chipset Intel® C612 Express chipset
SATA SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
  IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  ASPEED AST2400 BMC
Network Controllers Intel® i350-AM2 Dual Port Gigabit Ethernet
  Virtual Machine Device Queues reduce I/O overhead
  Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  1x Realtek RTL8201N PHY (dedicated IPMI)
Video ASPEED AST2400 BMC
Input / Output  
SATA 10x SATA3 (6Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
  1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2 rear)
Video 1x VGA port
TPM 1x TPM 1.2 20-pin Header
Expansion Slots  
PCI-Express 1x PCI-E 3.0 x16 slot
  1x PCI-E 3.0 x8 slot
  1x PCI-E 3.0 x16 + 1x PCI-E 3.0 x8
System BIOS  
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
  APM 1.2
  PCI 2.3
  ACPI 1.0 / 2.0 / 3.0 / 4.0
  USB Keyboard support
  SMBIOS 2.7.1
  UEFI 2.3.1